 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Tentative Printhead NF3004-VA30A Under development High speed thermal printhead (300 dots / inch) NF3004-VA30A NF-VA30 series are the thermal printheads developed for high-speed / high-resolution printing for the market of bar-code printer & scale-printer, based on "step-free" structure. These printheads realize ultra-highspeed printing with long life & high reliability. Applications Barcode printers Label printers Packaging printers ATM Ticket printers Scale printers Features 1) High dot reproducibility with step-free structure. 2) High-hardness protect cote type "W-coat" is employed with 150km abrasion life-time. 3) Even without history-control, high-speed printing more than 300mm/s can be achieved at 300dpi with clear print image. With history-control, 500mm/s printing is also possible at 300dpi. External dimensions (Unit : mm) DOT No.1 1240.5 108.4 Max.20 (7.792) 60.2 Max. 48 (3.5) Min. 4.3 Max.5 #2 #26 #6 #1 TYPE OF PRINTHEAD #1 #25 JST B6PS-VH 3-M3 EFFECTIVE DEPTH 3 HIROSE HIF3FC-26PA-2.54DS 1000.2 (36) 250.5 2.80.2 7.30.3 17.80.2 100.2 3 H10 EFFECTIVE DEPTH 3 14.2080.2 400.3 3 H10 LENGTH 4 EFFECTIVE DEPTH 3 (22) 800.3 DOT No.1 Note: No heat history control function inside the thermal printhead. External heat history control is required for high speed printing. (21.3) (26) Max.10 1/3 Tentative Printhead Equivalent circuit DOT #1280 NF3004-VA30A Under development DOT#1 VH 220F 35V GND BEO STB2 STB1 LAT LATCH 1280 641 640 1 DI 2 DI 1 CLK VDD GND TM TM DI No. DI 2 DI 1 DOT No. 1280 to 641 640 to 1 STB No. STB2 STB1 DOT No. 1280 to 641 640 to 1 2/3 Tentative Printhead Pin assignments HIROSE No. 1 3 5 7 9 11 13 15 17 19 Circuit VDD GND N.C. LAT GND N.C. VDD STB1 TM SENS2 No. 2 4 6 8 10 12 14 16 18 20 Circuit BEO DI2 CLK GND DI1 GND STB2 TM SENS1 SENS3 JST No. 1 2 3 4 5 6 Circuit VH VH VH GND GND GND NF3004-VA30A Under development Characteristics Parameter Effective printing width Dot pitch Total dot number Average resistance value Applied voltage Applied power Print cycle Pulse width Maximum number of dots energized simultaneously Maximum clock frequency Maximum roller diameter Running life / pulse life Operating temperature Symbol - - - Rave VH PO SLT TON - - - - - Typical 108.4 0.0847 1280 850 24 0.57 0.28 0.31 1280 10 Unit mm mm dots V W / dot ms ms dots MHz mm km / pulses 20 150 / 108 5 to 45 C 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of NF3004-VA30A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |